UAE 35 TPH Limestone Drying Plant
MORE
Project Overview
Main Equipment:
With 230°C natural gas hot air inside the cylinder and a material retention time of 10–15 minutes, the system stably reduces feed moisture from 12% to ≤0.5%, meeting the low-moisture requirements for ceramic body preparation and glass batch formulation.
All material-contact components are fitted with stainless steel liners to eliminate iron contamination during drying. This ensures stable whiteness and iron content of the feldspar powder, satisfying quality standards for ceramic glaze finish and glass transparency.
PLC-based precise temperature control prevents overheating and discoloration of feldspar powder. The fully enclosed negative-pressure operation, paired with bag dust collection, achieves low dust emission and cuts material loss for mines in western Turkey.
The client is a feldspar processing enterprise in western Turkey. Its feldspar is processed into wet filter cake after iron removal by flotation and dewatering, supplying local ceramic, glass and glaze manufacturers as well as markets in Europe and the Middle East.The wet feed has a baseline moisture of 12%, which can rise to 15% in the rainy season. Direct bulk handling of the wet material easily causes agglomeration and inaccurate batching. The client required a dedicated feldspar drying plant to reduce moisture to below 0.5%, powered by local piped natural gas, with strict requirements for iron contamination control and whiteness retention.
Since commissioning, the feldspar drying plant has maintained a stable outlet moisture of 0.4–0.5%, and remains fully compliant even with 15% inlet moisture during the rainy season, operating continuously at the rated 20 TPH capacity.The feldspar powder delivers consistent whiteness and iron content, enabling uniform batching for ceramic and glass end-users. Dust emission meets Turkish environmental regulations, and the bulk product remains free of agglomeration for export. The client has placed a repeat order for a second production line.