Egypt 50 TPH Phosphate Drying Plant
MORE
Project Overview
Main Equipment:
The single cylinder dryer can steadily reduce the surface moisture of washed materials from 8% to ≤1%. It features simple equipment maintenance and low operation threshold, and can process large batches of limestone in a single run.
Discharge temperature is controlled below 55°C, so dry material can be fed directly into silos or loaded for bulk shipment without a cooling bay. This prevents fine limestone particles from reabsorbing moisture due to residual heat and ensures uninterrupted operation with no material blockage.
Natural gas enables complete combustion and clean flue gas. Paired with a two-stage dust removal system consisting of a cyclone separator and baghouse, dust emissions fully comply with UAE environmental regulations. Fully enclosed negative-pressure operation minimizes fugitive dust on desert plant sites.
The client is a limestone processing enterprise in the UAE, supplying locally sourced high-purity limestone to lime, calcium carbonate and cement manufacturers. Despite the UAE’s desert climate and naturally low moisture content in raw limestone, quarries use water washing and wet dust suppression to remove clay impurities and control crushing dust. The 0–10 mm fine fraction after processing carries approximately 8% surface moisture. Direct feeding into lime kilns or bulk handling will cause unstable kiln conditions and material caking in storage bins. The client required a dedicated limestone drying plant to dewater washed wet material to ≤1%, powered by local piped natural gas.
Since commissioning, the limestone drying plant has maintained a stable outlet moisture of 0.8–1% and a discharge temperature below 55°C suitable for direct silo storage, operating continuously at the rated 35 TPH capacity. The dried material ensures steady kiln performance when fed into lime kilns and calcium carbonate grinding circuits. Dust emissions meet regulatory standards, and clean natural gas combustion reduces overall environmental treatment costs.